Release bearing clip

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Release bearing clip #824460 07/12/07 06:22 PM

Joined: Nov 2004

Posts: 408

SA/Texas

MnMsToY

Mudrunner

I lost on eon my clutch 82 L50 tranny. And it is the clips that hold the bearing to the fork. Can I run just one on top? No one seems to have them I have tried all over san antonio texas
I was going to amke the other one out of a dip stick because that is what it looks like.
Thanks,
Mike

1980 Toy, Dovetail, Chevy 60/14, 5.13 gears "Wheeling isn't cheap anymore"
http://www.texas4x4.org/gallery/MikesToyota

Entire Thread
Subject	Posted By	Posted
Release bearing clip	MnMsToY	07/12/07 06:22 PM
Re: Release bearing clip	4Crawler	07/12/07 06:37 PM
Re: Release bearing clip	MnMsToY	07/13/07 03:11 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.442s Queries: 15 (3.441s) Memory: 0.5966 MB (Peak: 0.6296 MB) Data Comp: Off Server Time: 2026-06-02 07:11:13 UTC
Valid HTML 5 and Valid CSS