Cab Interchangability

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Cab Interchangability [Re: kewlynx] #824926 07/18/07 11:33 AM

Joined: Dec 2006

Posts: 138

Perth, Western Australia

rustylux

Wheeler

So all the gauges and stuff worked as well... or was that a headache to work around?

Also curious if you guys encountered any problems with the fuel tank/filler neck. Aren't the 2nd gen cab's fuel fillers a part of the cab and the first gens are a part of the bed?

Entire Thread
Subject	Posted By	Posted
Cab Interchangability	rustylux	07/14/07 02:10 PM
Re: Cab Interchangability	fourwd1	07/18/07 02:47 AM
Re: Cab Interchangability	kewlynx	07/18/07 03:50 AM
Re: Cab Interchangability	rustylux	07/18/07 11:33 AM
Re: Cab Interchangability	fourwd1	07/18/07 05:17 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.487s Queries: 16 (3.485s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-06-06 07:23:10 UTC
Valid HTML 5 and Valid CSS