lock cylinder removal question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: lock cylinder removal question [Re: MAC] #825135 07/15/07 09:16 PM

Joined: Mar 2006

Posts: 7

JimDandy

Need a Spot

Yeah, if you don't have a key you can just line your drill up with the little pin and drill until you have removed most of it. Then you can punch it in and pull the lock cylinder. I had to do that when I had a key, but the cylinder wouldn't turn to the acc position.

Entire Thread
Subject	Posted By	Posted
lock cylinder removal question	MAC	07/15/07 06:13 PM
Re: lock cylinder removal question	cam01	07/15/07 07:06 PM
Re: lock cylinder removal question	MAC	07/15/07 10:22 PM
Re: lock cylinder removal question	JimDandy	07/15/07 09:16 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.381s Queries: 16 (3.380s) Memory: 0.5980 MB (Peak: 0.6310 MB) Data Comp: Off Server Time: 2026-05-27 21:36:00 UTC
Valid HTML 5 and Valid CSS