Quote
if you install the UCA from calmini do you still have to crank the torsion bars or do they remain at factory setting?


All the new control arms were for, was to allow the alignment to be brought back to within specs. They don't lift any at. You have to still crank the torsion bars to achieve lift.

Richard <img src="/forums/images/graemlins/patriot.gif" alt="" />

Had an 89 Isuzu Pickup
Had a 94 Mitsubishi Eclipse
84 Honda XL185S
Had an 89 Isuzu Trooper w/ 3.4 V6
01 Toyota Tundra SR5 V8 4Door Access Cab
http://community.webshots.com/user/rsayloriii