Rear leaf spring bushings - Gen1 Trooper

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Rear leaf spring bushings - Gen1 Trooper #825559 07/17/07 11:05 PM

Joined: Mar 2007

Posts: 114

Shovel

Wheeler

I have rear bushing questions!

Rear
I installed aftermarket shackles on the rear of my Trooper. However, they came with 3/8" bolts and 3/8" bolt holes, and the rubber bushings in the Trooper leaf springs have 1/2" holes in them. Is there a bushing kit made that fits the Trooper springs and the standard 3/8" shackle bolts.. perhaps one with the hardened metal sleeve?

Any suggestions are appreciated!

Entire Thread
Subject	Posted By	Posted
Rear leaf spring bushings - Gen1 Trooper	Shovel	07/17/07 11:05 PM
Re: Rear leaf spring bushings - Gen1 Trooper	frankinpa	07/18/07 05:55 PM
Re: Rear leaf spring bushings - Gen1 Trooper	Shovel	07/18/07 09:00 PM
Re: Rear leaf spring bushings - Gen1 Trooper	frankinpa	07/18/07 10:41 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.514s Queries: 15 (3.512s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-14 22:54:30 UTC
Valid HTML 5 and Valid CSS