front knuckle diagram

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: front knuckle diagram [Re: lttlbddy] #825842 07/19/07 01:26 PM

Joined: Jul 2007

Posts: 17

frankinpa

Need a Spot

Does this go for 4wd also? I should have stated it was a 4x4 amigo
After i read that i checked advace auto's site and they only listed 2wd bearings no reference to 4wd. Then i checked autozone .com and they listed 1 bearing for somthing in the range of 80.00usd. Next question is there a special socket for the #8 locknut? Or does sombody have a OTC part number?

Last edited by frankinpa; 07/19/07 01:31 PM.

Entire Thread
Subject	Posted By	Posted
front knuckle diagram	frankinpa	07/18/07 10:43 PM
Re: front knuckle diagram	mlclark	07/18/07 11:54 PM
Re: front knuckle diagram	lttlbddy	07/19/07 07:40 AM
Re: front knuckle diagram	frankinpa	07/19/07 01:26 PM
Re: front knuckle diagram	lttlbddy	07/19/07 03:22 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.528s Queries: 16 (3.526s) Memory: 0.6013 MB (Peak: 0.6343 MB) Data Comp: Off Server Time: 2026-06-22 00:46:03 UTC
Valid HTML 5 and Valid CSS