bolt pattern for drive shaft on T-case

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: bolt pattern for drive shaft on T-case [Re: cam01] #825935 07/19/07 09:53 PM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Yes, clamping the two flanges together and using that for lining up the holes works well. Put the new holes midway between the old holes. Also, drill one hole, then put in a bolt before drilling the other holes. Best to do one hole at a time so you keep things lined up.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
bolt pattern for drive shaft on T-case	Locked_Solid_Toy	07/19/07 04:11 AM
Re: bolt pattern for drive shaft on T-case	OOP'S	07/19/07 04:22 AM
Re: bolt pattern for drive shaft on T-case	DirtyHarry	07/19/07 04:23 AM
Re: bolt pattern for drive shaft on T-case	Locked_Solid_Toy	07/19/07 05:22 AM
Re: bolt pattern for drive shaft on T-case	cam01	07/19/07 06:19 AM
Re: bolt pattern for drive shaft on T-case	4Crawler	07/19/07 09:53 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.397s Queries: 16 (3.395s) Memory: 0.6048 MB (Peak: 0.6378 MB) Data Comp: Off Server Time: 2026-05-27 20:39:31 UTC
Valid HTML 5 and Valid CSS