Engine rebuid recommendation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine rebuid recommendation [Re: 1987Raider] #826125 07/20/07 08:59 PM

Joined: May 2000

Posts: 6,132

Portland OR

Kevin C

Trail Leader

That piston has a lower deck height and will drop the CR a bit...1.395 VS 1.418 comp height. .023" is a pretty big change and will drop the CR about 1/2 a point.

Unless you mill the head a bunch.... like .023"

Kevin C

87 Turbo Intercooled Raider, roller cam, torsen rear diff, LSD front diff, lockup auto with modified converter, V6 brakes, low transfer case gears...

Entire Thread
Subject	Posted By	Posted
Engine rebuid recommendation	TrooperMonty	07/20/07 04:47 PM
Re: Engine rebuid recommendation	1987Raider	07/20/07 06:41 PM
Re: Engine rebuid recommendation	Kevin C	07/20/07 08:59 PM
Re: Engine rebuid recommendation	fasteddy	07/21/07 01:45 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.513s Queries: 15 (3.511s) Memory: 0.6000 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-06-22 13:59:44 UTC
Valid HTML 5 and Valid CSS