Clutch master cylinder? Slave cylinder or something else?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Clutch master cylinder? Slave cylinder or something else? #826341 07/22/07 10:44 PM

Joined: Oct 2004

Posts: 47

Portland, OR

Scotty_Gotti Offline

Getting the Wheeling Fever

I replaced my clutch master cylinder yesterday because it was leaking bad. I got everything correctly assembled and bled the system with a one man bleeder. I am pretty certain that I cycled new fluid through the entire system. So here the problem, When the vehicle is started I cannot get it to go in to any gear at all. I have tried to bleed it repeatedly. There is a good range of movement down at the slave cylinder as well. Any ideas?

Entire Thread
Subject	Posted By	Posted
Clutch master cylinder? Slave cylinder or something else?	Scotty_Gotti	07/22/07 10:44 PM
Re: Clutch master cylinder? Slave cylinder or something else?	kewlynx	07/23/07 05:21 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.078s Queries: 15 (4.076s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-15 22:34:29 UTC
Valid HTML 5 and Valid CSS