Quote
Find a way to punch the existing one into the block, it will not hurt anything in there. The put one of the expandable ones in place and tighten the bolt.
Ive never done one on that engine but have on many others. It is usually tight to get to but it should be doable.
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />


so by leaving the plug in the block it won't cause a restriction in flow???? I usually take a self tapping screw and put it through the plug and then pull the plug out with a piece of mechanics wire wrapped and tied around the ST screw

always working