torsion bars

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

torsion bars #826660 07/24/07 11:58 AM

Joined: Jan 2006

Posts: 24

twholland

Need a Spot

Want to adjust my t-bars, but first i would like to know how long (far out) the adjusting bolts should be sticking out stock. Reason being is that i bought the truck used and i'm not sure if they adjusted the t-bars already. The bolts are sticking out about 1.25-1.5". Is it OK to tighten down further???

'97 T100 XCab 4X4 SR5, 3" BL, 33x12.5 BFG A/T, Warn hubs, Ranchos

Entire Thread
Subject	Posted By	Posted
torsion bars	twholland	07/24/07 11:58 AM
Re: torsion bars	Jake97T	07/24/07 04:31 PM
Re: torsion bars	twholland	07/25/07 05:53 PM
Re: torsion bars	Jake97T	07/25/07 07:11 PM
Re: torsion bars	twholland	07/26/07 08:16 AM
Re: torsion bars	Jake97T	07/26/07 05:46 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.517s Queries: 15 (3.515s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-05 01:17:52 UTC
Valid HTML 5 and Valid CSS