3.0v6 to a 3.4v6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

3.0v6 to a 3.4v6 #826848 07/25/07 03:12 AM

Joined: Jul 2007

Posts: 1

The95HOG

Need a Spot

I have a 95 runner that I have already put the 3.4 motor into and bolted it the 95 trans. Everything seems right I got it to crank but the trans wireing is killing me. So what im asking is has anyone done such a swap and if so help me out with where to buy or build a wireing harness.

3.0 to 3.4 wiring multiple choice, up to 2 choices
n (0%, 0 Votes)
y (0%, 0 Votes)
No Votes Yet Voting on this poll ends: 07/25/08 02:10 AM

Entire Thread
Subject	Posted By	Posted
3.0v6 to a 3.4v6	The95HOG	07/25/07 03:12 AM
Re: 3.0v6 to a 3.4v6	kewlynx	07/25/07 03:15 AM
Re: 3.0v6 to a 3.4v6	Kutter	07/26/07 05:40 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.526s Queries: 20 (3.523s) Memory: 0.6006 MB (Peak: 0.7782 MB) Data Comp: Off Server Time: 2026-06-01 21:08:49 UTC
Valid HTML 5 and Valid CSS