3.0v6 to a 3.4v6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3.0v6 to a 3.4v6 [Re: The95HOG] #826850 07/26/07 05:40 AM

Joined: Aug 2005

Posts: 229

Kansas

Kutter

Wheeler

I have completed the 3.4 swap. I used the harness sold by Off Road Solutions (ORS). Check out offroadsolutions.com
Cost may seem high but it is plug and play simple to install.

Which ECU, maf, ignitor, VSV's, etc did you use?

Is your tranny auto or manual?

1995 4Runner Limited V6 3.4 Liter 5 Speed 4x4
1995 4Runner V6 Auto 2WD

Entire Thread
Subject	Posted By	Posted
3.0v6 to a 3.4v6	The95HOG	07/25/07 03:12 AM
Re: 3.0v6 to a 3.4v6	kewlynx	07/25/07 03:15 AM
Re: 3.0v6 to a 3.4v6	Kutter	07/26/07 05:40 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.451s Queries: 16 (3.449s) Memory: 0.5962 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-01 15:19:50 UTC
Valid HTML 5 and Valid CSS