cancelling EGR valve on 2.6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

cancelling EGR valve on 2.6 #827019 07/26/07 02:08 AM

Joined: Jan 2006

Posts: 121

Eibach Springs, California

rrodriguez Offline

Wheeler

I have no catalythic converter, the secondary air supply reed valve is cancelled, i understand the purpose of the EGR is to return part of the exhaust gases to the intake to reduce the temperature and lower the nitrous oxides emissions, this is only for smog control or affects other things like fuel economy, Power output, etc.?, should i plug the vacuum connector?

Entire Thread
Subject	Posted By	Posted
cancelling EGR valve on 2.6	rrodriguez	07/26/07 02:08 AM
Re: cancelling EGR valve on 2.6	fasteddy	07/26/07 05:33 AM
Re: cancelling EGR valve on 2.6	generation_one	07/26/07 08:32 PM
Re: cancelling EGR valve on 2.6	fasteddy	07/27/07 02:08 AM
Re: cancelling EGR valve on 2.6	generation_one	07/27/07 03:28 PM
Re: cancelling EGR valve on 2.6	generation_one	07/27/07 03:32 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.630s Queries: 15 (3.627s) Memory: 0.6021 MB (Peak: 0.6351 MB) Data Comp: Off Server Time: 2026-06-16 20:48:00 UTC
Valid HTML 5 and Valid CSS