cancelling EGR valve on 2.6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: cancelling EGR valve on 2.6 [Re: fasteddy] #827021 07/26/07 08:32 PM

Joined: Mar 2007

Posts: 950

Darts Point, Mississippi - USA

generation_one Offline

Rock Warrior

Quote

EGR is the spawn of the devil.

I aint very relgious.

What would happen if I were to plug all the hoses and openings to to valve ? Would this serve the same purpose as the blocking plate?
Of course, I am asking about a 3.0 v6

1989 5 door montero 3.0 auto
stock original Japanese
about 200k miles

Entire Thread
Subject	Posted By	Posted
cancelling EGR valve on 2.6	rrodriguez	07/26/07 02:08 AM
Re: cancelling EGR valve on 2.6	fasteddy	07/26/07 05:33 AM
Re: cancelling EGR valve on 2.6	generation_one	07/26/07 08:32 PM
Re: cancelling EGR valve on 2.6	fasteddy	07/27/07 02:08 AM
Re: cancelling EGR valve on 2.6	generation_one	07/27/07 03:28 PM
Re: cancelling EGR valve on 2.6	generation_one	07/27/07 03:32 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.452s Queries: 16 (3.450s) Memory: 0.6020 MB (Peak: 0.6350 MB) Data Comp: Off Server Time: 2026-06-14 00:44:17 UTC
Valid HTML 5 and Valid CSS