cancelling EGR valve on 2.6

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: cancelling EGR valve on 2.6 [Re: generation_one] #827022 07/27/07 02:08 AM

Joined: Jan 2001

Posts: 13,649

Helen , GA

fasteddy

Web Wheeler

You'd need to block both ends of the accordion steel egr pipe. I don't know if your ecu monitors egr function (by watching a vac switch, I think), so you either have to burn out CEL bulbs or fool the ecu. Again, I would tap and plug in great preference to any goo filling. EGR gets HOT at the exh end.

Not responsible for advice not taken...

Entire Thread
Subject	Posted By	Posted
cancelling EGR valve on 2.6	rrodriguez	07/26/07 02:08 AM
Re: cancelling EGR valve on 2.6	fasteddy	07/26/07 05:33 AM
Re: cancelling EGR valve on 2.6	generation_one	07/26/07 08:32 PM
Re: cancelling EGR valve on 2.6	fasteddy	07/27/07 02:08 AM
Re: cancelling EGR valve on 2.6	generation_one	07/27/07 03:28 PM
Re: cancelling EGR valve on 2.6	generation_one	07/27/07 03:32 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.525s Queries: 16 (3.523s) Memory: 0.6039 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-13 20:14:58 UTC
Valid HTML 5 and Valid CSS