cylinder head information

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

cylinder head information #827037 07/26/07 04:11 AM

Joined: Jun 2007

Posts: 16

Huntsville, Ala., USA

edselsouth1 Offline

Need a Spot

Guys and gals, I'm ready to install the reconditioned cylinder head on my 1995 Sportage, 2.0L SOHC. Does anyone care to share the torque sequence, and the proper torque values for this install? Any input is greatly appreciated. Information in the Fel-pro specification pamphlet is non existent, as is information on the Net. Thanks, David.

Entire Thread
Subject	Posted By	Posted
cylinder head information	edselsouth1	07/26/07 04:11 AM
Re: cylinder head information	Axe Man	07/26/07 04:17 AM
Re: cylinder head information	edselsouth1	08/07/07 03:42 AM

Moderated by 4x4Wire, Axe Man, DamKia

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.313s Queries: 15 (4.310s) Memory: 0.5948 MB (Peak: 0.6277 MB) Data Comp: Off Server Time: 2026-06-06 00:20:02 UTC
Valid HTML 5 and Valid CSS