Solid axle spindle and hubs info wanted

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Solid axle spindle and hubs info wanted #827172 07/27/07 12:03 AM

Joined: Jan 2007

Posts: 46

scotia

Getting the Wheeling Fever

Are the hubs/spindles from a 60 series cruiser the same as the solid axle 4/runners/trucks? I have a set side by side and cannot see any differences. Went so far as to swap a hub from one to the other and they seem to be the same.

Entire Thread
Subject	Posted By	Posted
Solid axle spindle and hubs info wanted	scotia	07/27/07 12:03 AM
Re: Solid axle spindle and hubs info wanted	Adam F	07/27/07 04:39 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.675s Queries: 15 (3.673s) Memory: 0.5941 MB (Peak: 0.6271 MB) Data Comp: Off Server Time: 2026-06-22 17:05:46 UTC
Valid HTML 5 and Valid CSS