HEI distributor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

HEI distributor #827179 07/27/07 02:46 AM

Joined: May 2007

Posts: 3

krome

Need a Spot

Will a HEI distributor from a chevy 3.8L V6 work in a 4.3L V6? I found one in a '82 chevy monte carlo but not sure if it would work.I am building a '97 vortec with a carb setup and need a non-computer distributor w/vacume advance. Also I do have a V8 HEI unit. Can it be reworked internally for a V6? Different pickup or module? I dont have any experience with these units. So any help would be great.

Entire Thread
Subject	Posted By	Posted
HEI distributor	krome	07/27/07 02:46 AM
Re: HEI distributor	52degrees	07/27/07 05:58 AM
Re: HEI distributor	mechanic58	10/08/07 12:21 AM
Re: HEI distributor	52degrees	10/08/07 03:26 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.719s Queries: 15 (3.716s) Memory: 0.5962 MB (Peak: 0.6292 MB) Data Comp: Off Server Time: 2026-06-09 22:38:14 UTC
Valid HTML 5 and Valid CSS