Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
to all your oily blow bye problems bye bye #827273 07/27/07 06:15 PM
Joined: Jul 2007
Posts: 10
J
jesoe Offline OP
Need a Spot
sorry to the fellas who answered my last post my modem went down and i havent been able to read the answers but i have the cure all soluton for blow bye which a recap my motor had oil blowin out of the dipstick and out of the pcv valve and i was losin a quart of oil every 250 miles ive got it down to one eight of a quart every 500 milers well heres the fix i ran a hose from my pcv valve to the intake vacum directly into the carbuerator burns that eight i was talkin bout thanks bigjim for that but it wasnt enough i also had to remove my oil fill cap and put a grommit on it and put a breather i took from a chevy small block they have them after market i used a big one those hose comoing from it is about half inch in width i then ran this into my air cleaner box and there is no oil in my air filter either this creates enough vacum to keep my motor dry thanks to an old garage ratrodder the grommit i used for the breather was completely solid on the bottom and i cut a little corner of it out so as to not create to much vacum so you might need to get a couple of grommits that you can experiment with this was a cheap fix and i have a dry motor thanks to all on this page for listened to my winey ass but i hope this helps another jeeper with there oil bucket <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: to all your oily blow bye problems bye bye [Re: jesoe] #827274 07/27/07 06:22 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Jes take the pcv out of the loop! You will have more vac without it!
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
Re: to all your oily blow bye problems bye bye [Re: BigJim] #827275 07/27/07 06:25 PM
Joined: Jul 2007
Posts: 10
J
jesoe Offline OP
Need a Spot
you mean remove the pcv valve and connect line to where i did with no pcv in it

Re: to all your oily blow bye problems bye bye [Re: jesoe] #827276 07/27/07 06:29 PM
Joined: Oct 2003
Posts: 7,768
BigJim Offline
Web Wheeler
Yep!
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />


professional bovine relocation specialist
thanks again [Re: BigJim] #827277 07/27/07 06:40 PM
Joined: Jul 2007
Posts: 10
J
jesoe Offline OP
Need a Spot
once again thanks here i go i letta you know the difference whats the difference between a lawyer and a maggot there is none they both deserve to eat *****


Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.6030 MB (Peak: 0.6672 MB) Data Comp: Off Server Time: 2026-07-13 03:39:40 UTC
Valid HTML 5 and Valid CSS