How do I run a remote switch for a 5 prong winch control?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: How do I run a remote switch for a 5 prong winch control? [Re: VTSkiBum] #827807 08/02/07 04:31 AM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

In the old days Jeeps had inside switches and a cable to put her in gear and out of gear.
Could I suggest using more than one switch?
Big JIm <img src="/forums/images/graemlins/pfft.gif" alt="" />

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
How do I run a remote switch for a 5 prong winch control?	VTSkiBum	07/30/07 10:18 PM
Re: How do I run a remote switch for a 5 prong winch control?	BigJim	07/31/07 01:48 AM
Re: How do I run a remote switch for a 5 prong winch control?	kc77cj7	08/01/07 09:16 PM
Re: How do I run a remote switch for a 5 prong winch control?	VTSkiBum	08/02/07 02:32 AM
Re: How do I run a remote switch for a 5 prong winch control?	BigJim	08/02/07 04:31 AM
Re: How do I run a remote switch for a 5 prong winch control?	kc77cj7	08/02/07 10:05 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.520s Queries: 16 (3.517s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-07 06:04:59 UTC
Valid HTML 5 and Valid CSS