I searched the site for a fix but did not see one... So here is what I found out.
The problem was that when the parking brake was released somtimes the dash indicator would turn off. Sometimes it would not turn off. After wasting some time looking for a problem with the parking brake switch, I decided to check a wiring diagram. Turns out that the dash brake lite is also wired to the brake fluid level switch on the resevoir. The connector for this switch is near/under the windshield wiper fluid resevoir. Pulling this connector apart revielded lots of corrosion. Probably from winshield wiper cleaner. I cleaned up the corrosion in the connector and Bah Da Bing flakey brake indicator lite problem was resolved. Note to myself! Always look at a wiring diagram first.