back again. knock sensor problem.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: back again. knock sensor problem. [Re: wytee] #829700 08/09/07 02:34 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Check the continuity of the wires from the KS back to the ECU, both the signal wire and the grounded sheath as well. ECU pinouts on the page below:

http://www.4crawler.com/4x4/CheapTricks/TPS/index.shtml#Troubleshooting

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
back again. knock sensor problem.	wytee	08/09/07 12:48 AM
Re: back again. knock sensor problem.	Snowtoy	08/09/07 01:56 AM
Re: back again. knock sensor problem.	wytee	08/09/07 02:11 AM
Re: back again. knock sensor problem.	4Crawler	08/09/07 02:34 AM
Re: back again. knock sensor problem.	Staceman	08/09/07 02:49 PM
Re: back again. knock sensor problem.	wytee	08/11/07 07:34 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.604s Queries: 16 (3.602s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-06-22 19:43:29 UTC
Valid HTML 5 and Valid CSS