Thicker head gasket...

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Thicker head gasket... [Re: MAC] #830389 08/12/07 02:53 AM

Joined: Dec 2006

Posts: 138

Perth, Western Australia

rustylux

Wheeler

If it were me I'd use the thicker HG. You probably dont know the full history of your mill. The block may have been decked at one stage and it may be the 2nd time the heads been resurfaced. With such tight tolerances being used in these engines I'd use the thicker HG just for extra insurance.

Entire Thread
Subject	Posted By	Posted
Thicker head gasket...	DanSweet	08/12/07 12:51 AM
Re: Thicker head gasket...	Kaptain	08/12/07 01:21 AM
Re: Thicker head gasket...	MAC	08/12/07 01:33 AM
Re: Thicker head gasket...	rustylux	08/12/07 02:53 AM
Re: Thicker head gasket...	engnbldr	08/12/07 03:48 AM
Re: Thicker head gasket...	DanSweet	08/12/07 04:24 AM
Re: Thicker head gasket...	subliminaltrips	08/12/07 04:53 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.613s Queries: 16 (3.611s) Memory: 0.6038 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-20 06:03:21 UTC
Valid HTML 5 and Valid CSS