2nd Gen Rodeo Door fit / alignment question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 2nd Gen Rodeo Door fit / alignment question [Re: Mr. Mojo] #830877 08/16/07 05:26 AM

Joined: Dec 1999

Posts: 1,214

Denver Colorado USA

Jeff Mason Offline

Body Damage is Cool

Dale -

I've hit my amigo pretty solidly quite a few times over the years and have never noticed and door alignment issues. There's gotta be something that came loose in the hinge area, I can't see hitting the boulder bars hard enough to do what you are experiencing...

Jeff Mason

Whatever makes you upset in someone else...also exists in you

Entire Thread
Subject	Posted By	Posted
2nd Gen Rodeo Door fit / alignment question	Mr. Mojo	08/15/07 05:10 AM
Re: 2nd Gen Rodeo Door fit / alignment question	Jeff Mason	08/16/07 05:26 AM
Re: 2nd Gen Rodeo Door fit / alignment question	Mr. Mojo	08/19/07 10:55 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.489s Queries: 16 (3.487s) Memory: 0.5953 MB (Peak: 0.6282 MB) Data Comp: Off Server Time: 2026-06-04 07:43:23 UTC
Valid HTML 5 and Valid CSS