4.3tbi on a 2.8

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4.3tbi on a 2.8 [Re: VOLTRON] #831903 08/21/07 05:12 PM

Joined: Sep 2006

Posts: 84

Dallas TX

VOLTRON

Getting the Wheeling Fever

also do I just tell the machine shop to bore to a 4.3 and they will know the right diameter or do I need to tell them the diameter?

NOT ALL WHO WANDER ARE LOST

Entire Thread
Subject	Posted By	Posted
4.3tbi on a 2.8	VOLTRON	08/21/07 03:55 PM
Re: 4.3tbi on a 2.8	Richard Saylor	08/21/07 04:46 PM
Re: 4.3tbi on a 2.8	VOLTRON	08/21/07 05:09 PM
Re: 4.3tbi on a 2.8	VOLTRON	08/21/07 05:12 PM
Re: 4.3tbi on a 2.8	Richard Saylor	08/21/07 06:11 PM
Re: 4.3tbi on a 2.8	Ed Mc	08/22/07 01:44 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.889s Queries: 16 (3.887s) Memory: 0.6010 MB (Peak: 0.6340 MB) Data Comp: Off Server Time: 2026-07-16 01:11:29 UTC
Valid HTML 5 and Valid CSS