will an is spindle fit n a solid axle?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: will an is spindle fit n a solid axle? [Re: Jake97T] #832528 08/26/07 02:54 AM

Joined: Aug 2006

Posts: 215

ocala,fl

subliminaltrips Offline

Wheeler

actually i was talking about the hub, not the lockout but the actual hub. got a good look at an ifs setup today but it looks a but different. i think to use the ifs hub with the fj rotors on a solid axle you need the widening kit from sky.

www.fattshack.com

www.blueyfab.com

Entire Thread
Subject	Posted By	Posted
will an is spindle fit n a solid axle?	subliminaltrips	08/25/07 06:20 PM
Re: will an is spindle fit n a solid axle?	Jake97T	08/25/07 07:35 PM
Re: will an is spindle fit n a solid axle?	subliminaltrips	08/26/07 02:54 AM
Re: will an is spindle fit n a solid axle?	ErikB	08/27/07 09:26 PM
Re: will an is spindle fit n a solid axle?	Red_Chili	08/28/07 07:06 PM
Re: will an is spindle fit n a solid axle?	subliminaltrips	08/28/07 11:30 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.554s Queries: 16 (3.552s) Memory: 0.6036 MB (Peak: 0.6366 MB) Data Comp: Off Server Time: 2026-06-16 09:19:17 UTC
Valid HTML 5 and Valid CSS