Quote


The wiring going INTO the amp will be the 2 plugs you see in the installdr instructions. Not where you cut the plug off, that was the wiring from the amp to the headunit, but where the wires from the truck harness go into the amp.



He's right. Like I said before, you need to cut into the wires going INTO the amp, not OUT of the amp like you did.

Pull the amp out, and you'll see the plugs in the back of it, and those will match up with installdr.

88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride