Bell housing destroyed

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bell housing destroyed [Re: lttlbddy] #832739 08/29/07 02:37 AM

Joined: Mar 2007

Posts: 223

Claremore, Oklahoma

4xToy

Wheeler

Brian, I've got a front shaft off of a 2.6 with an auto. By your sig, I see a 60* v6 right? I know matt at indy4x has a good bell housing on a 2.6 tranny that I just gave him but it won't work if you've got the v6.

-Chad

Entire Thread
Subject	Posted By	Posted
Bell housing destroyed	Storm Trooper	08/27/07 07:54 PM
Re: Bell housing destroyed	lttlbddy	08/27/07 09:28 PM
Re: Bell housing destroyed	4xToy	08/29/07 02:37 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.628s Queries: 15 (3.625s) Memory: 0.5969 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-07-16 03:46:15 UTC
Valid HTML 5 and Valid CSS