Engine won't line up with mounts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Engine won't line up with mounts [Re: 4Crawler] #833393 09/01/07 04:25 AM

Joined: Oct 2003

Posts: 108

Bellingham, WA

DanSweet

Wheeler

Ok, I finally got it. Had to get the 6 ft pry bar to push the engine to the right while prying with my other hand on the motor mount.... I have found putting an engine in on an unleveled gravel driveway is something I never hope to experience again...

Dan

94' 22re Ex Cab 4x4...pretty much stock, 2" 4 Crawler body lift and 32 x 11.50 bfg mud terrains.

Entire Thread
Subject	Posted By	Posted
Engine won't line up with mounts	DanSweet	08/31/07 09:59 PM
Re: Engine won't line up with mounts	4Crawler	08/31/07 10:17 PM
Re: Engine won't line up with mounts	DanSweet	09/01/07 04:25 AM
Re: Engine won't line up with mounts	4Crawler	09/01/07 04:31 AM
Re: Engine won't line up with mounts	yodta	09/02/07 06:24 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.495s Queries: 16 (3.493s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-06-15 22:20:08 UTC
Valid HTML 5 and Valid CSS