Well i havent really introduced myself but im Bob i just moved to West Haven utah and picked up a $400 dollar 86 montero. I bought it off craigs list non running needing a battery and carb tinkering. I was told it doesnt run because the carb needs adjusting. The truck has 157k miles on it and some rust but overall in decent shape. I picked up a battery today and tryed to start it but nothing at all just turned over. so i check fuel and spark was fine and timing was good too i couldnt figure it out. So after reading through the haynes manual i got with the truck i figured out the guy had all the plug wires on wrong. so after i corrected that it fired up quick and idled steady at about 1k rpms. I drove i t around the block and it didnt stall or anything and pulled decent up to about 4k rpms but wont go passed that. Theres a strange rattle noise comming from somewhere too not sure if its engine related or what so i took a video and hope someone here can enlighten me. Theres some heat shield or skid plate that rattles off and on too. But let me know what u think.

[Linked Image]

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]