Gen 3 NM Custom Bumper

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Gen 3 NM Custom Bumper #833776 09/03/07 05:43 PM

Joined: Nov 2002

Posts: 115

Simi Valley, Ca.

Lygriek

Wheeler

Almost done with my bumper thought I would share a couple of pics.

[Linked Image]

I left room for a winch and you can see, there will be some panels bolted into the "wings" and there will be tread plate (diamond plate) on the top. Also, need to add a couple of d-ring's but needed to stop working on this project for a while so I just used duplicolor for now, will have it powder coated when ts all done.

Last edited by Lygriek; 09/03/07 09:39 PM.

Lygriek, aka Michael
2003 Montero XLS GEN III, 285/75R16 Pro Comp Xtreme MT's
Ironman Springs/KYB Shocks. Custom Rocker Protection and Bumper.

Entire Thread
Subject	Posted By	Posted
Gen 3 NM Custom Bumper	Lygriek	09/03/07 05:43 PM
Re: Gen 3 (NM) Custom Bumper	hazy_daze	09/03/07 05:45 PM
Re: Gen 3 (NM) Custom Bumper	torquemonster	09/03/07 07:57 PM
Re: Gen 3 (NM) Custom Bumper	jdchappell	09/03/07 08:29 PM
Re: Gen 3 (NM) Custom Bumper	DavidG	09/07/07 02:27 AM
Re: Gen 3 (NM) Custom Bumper	Angelo	09/07/07 04:41 AM
Re: Gen 3 (NM) Custom Bumper	Lygriek	09/07/07 05:17 AM
Re: Gen 3 (NM) Custom Bumper	TrooperXS	09/07/07 12:39 PM
Re: Gen 3 (NM) Custom Bumper	Lygriek	09/07/07 06:05 PM
Re: Gen 3 (NM) Custom Bumper	hazy_daze	09/09/07 03:08 PM
Re: Gen 3 (NM) Custom Bumper	PHIL_	09/09/07 06:19 PM
Re: Gen 3 (NM) Custom Bumper	Lygriek	09/10/07 05:59 AM
Re: Gen 3 (NM) Custom Bumper	DirtDriver	09/08/07 06:17 AM
Re: Gen 3 (NM) Custom Bumper	icysyrup	09/09/07 04:35 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social: