Throw out bearing insalled wrong? or bad slave?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Throw out bearing insalled wrong? or bad slave? #834257 09/05/07 10:31 PM

Joined: Nov 2006

Posts: 25

Virginia

throwin_roost Offline

Getting the Wheeling Fever

I replaced the clutch on my 93 3.2 rodeo and now my cluth pedal is going to the floor and not disengaging the clutch. I am confused. I never unhooked any hoses from the slave cylinder, I just hung it out of the way. I tried bleeding yesterday and it didnt help. Any help would be much appreciated. Thanks.

93 Rodeo 3.2L, 3" body lift, 3" Indy4x lift on 33's, flowmaster50, stainless brakes and clutch lines,

Entire Thread
Subject	Posted By	Posted
Throw out bearing insalled wrong? or bad slave?	throwin_roost	09/05/07 10:31 PM
Re: Throw out bearing insalled wrong? or bad slave?	mlclark	09/05/07 10:40 PM
Re: Throw out bearing insalled wrong? or bad slave?	blue rig	09/06/07 03:31 AM
Re: Throw out bearing insalled wrong? or bad slave?	throwin_roost	09/06/07 09:48 PM
Re: Throw out bearing insalled wrong? or bad slave?	Jim_Paget	09/07/07 04:02 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.603s Queries: 15 (3.601s) Memory: 0.6016 MB (Peak: 0.6346 MB) Data Comp: Off Server Time: 2026-06-16 23:30:03 UTC
Valid HTML 5 and Valid CSS