Throw out bearing insalled wrong? or bad slave?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Throw out bearing insalled wrong? or bad slave? [Re: throwin_roost] #834261 09/07/07 04:02 AM

Joined: Aug 2000

Posts: 4,868

Mount Vernon, WA, USA

Jim_Paget

Roll Me Over

CAREFULLY pry up the dust boot on the slave cylinder. If there is fluid inside the boot, that means that it is leaking past the piston. If not, there is no real reason to change the slave.

Jim Paget
88 YJ with a few changes

www.rrr4x4.com

Entire Thread
Subject	Posted By	Posted
Throw out bearing insalled wrong? or bad slave?	throwin_roost	09/05/07 10:31 PM
Re: Throw out bearing insalled wrong? or bad slave?	mlclark	09/05/07 10:40 PM
Re: Throw out bearing insalled wrong? or bad slave?	blue rig	09/06/07 03:31 AM
Re: Throw out bearing insalled wrong? or bad slave?	throwin_roost	09/06/07 09:48 PM
Re: Throw out bearing insalled wrong? or bad slave?	Jim_Paget	09/07/07 04:02 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.491s Queries: 16 (3.489s) Memory: 0.6014 MB (Peak: 0.6344 MB) Data Comp: Off Server Time: 2026-06-13 12:12:22 UTC
Valid HTML 5 and Valid CSS