beefing up the dana 30 & 35

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

beefing up the dana 30 & 35 #835295 09/11/07 02:47 PM

Joined: Aug 2007

Posts: 4

North Mississippi

mikeh

Need a Spot

I've been thinking about beefing up my axles. I have a 86' Cherokee with the Dana 30 in the front and a Dana 35 in the rear. I was wondering if there is a way to beef up the axle tubes and differential. I know you can purchase new and stronger axles and gears but I was thinking about trying something to strengthen the outside of the axle to prevent flexing in the tubes and differential housing. Is this a bad idea or is it possible?

Entire Thread
Subject	Posted By	Posted
beefing up the dana 30 & 35	mikeh	09/11/07 02:47 PM
Re: beefing up the dana 30 & 35	DBL_DTY97TJ	09/11/07 03:44 PM
Re: beefing up the dana 30 & 35	cbrazor	09/12/07 03:40 AM
Re: beefing up the dana 30 & 35	Brown81CJ5	09/16/07 06:42 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.887s Queries: 15 (3.885s) Memory: 0.5979 MB (Peak: 0.6309 MB) Data Comp: Off Server Time: 2026-06-20 06:56:47 UTC
Valid HTML 5 and Valid CSS