|
|
|
|
 2.6L Igniter Voltage
#835579
09/12/07 07:48 PM
|
Joined: Jul 2004
Posts: 62
OP
Getting the Wheeling Fever
|
Anyone have an idea of the expected voltage for the igniter <built into the distributor> on a 2.6L? The FSM only says "see if it sparks". I'm trying to plan an upgrade to megasquirt with locked dizzy, and it would be nice to know what the "spec" voltage output should be.
--frankb
'88 SWB 5-speed Megasuirt MS-II V3 Starion TBI N/A 650/950cc Injectors 4Runner Alloys 275-70R16
|
|
|
Re: 2.6L Igniter Voltage
[Re: franklynberry]
#835580
09/12/07 11:28 PM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
It's AC voltage, not DC.
The igniter sees the change from - > + or + > - and triggers on the pass thru zero. I'm sorry I don't know the peak voltage, and it probably changes with rpm, too, but I'd guess it's small given the generation method...
Not responsible for advice not taken...
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5867 MB (Peak: 0.6348 MB) Data Comp: Off Server Time: 2026-06-17 20:04:21 UTCValid HTML 5 and Valid CSS 
