2.6L Igniter Voltage

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

2.6L Igniter Voltage #835579 09/12/07 07:48 PM

Joined: Jul 2004

Posts: 62

milwaukee, wi

franklynberry Offline

Getting the Wheeling Fever

Anyone have an idea of the expected voltage for the igniter <built into the distributor> on a 2.6L? The FSM only says "see if it sparks". I'm trying to plan an upgrade to megasquirt with locked dizzy, and it would be nice to know what the "spec" voltage output should be.

--frankb

'88 SWB 5-speed Megasuirt MS-II V3 Starion TBI N/A 650/950cc Injectors 4Runner Alloys 275-70R16

Entire Thread
Subject	Posted By	Posted
2.6L Igniter Voltage	franklynberry	09/12/07 07:48 PM
Re: 2.6L Igniter Voltage	fasteddy	09/12/07 11:28 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.454s Queries: 15 (3.451s) Memory: 0.5944 MB (Peak: 0.6273 MB) Data Comp: Off Server Time: 2026-06-19 03:24:42 UTC
Valid HTML 5 and Valid CSS