Hood release cable

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Hood release cable #836760 09/18/07 05:35 PM

Joined: Oct 2003

Posts: 177

N. KY

HawkFanatic Offline

Wheeler

My hood release sticks in the open position. I have to dig at the latch with a screw driver to get the cable to release and the hood to latch closed.
Is it tough to remove from the truck and lube, or should I just replace it?

thanks

1994 Yota 4x4 Short cab
5spd 22RE
Mostly Stock, but I'm learnin'!
31x10.50s

Entire Thread
Subject	Posted By	Posted
Hood release cable	HawkFanatic	09/18/07 05:35 PM
Re: Hood release cable	mobbinyote	09/18/07 07:48 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.549s Queries: 15 (3.547s) Memory: 0.5939 MB (Peak: 0.6268 MB) Data Comp: Off Server Time: 2026-06-19 20:17:38 UTC
Valid HTML 5 and Valid CSS