exhaust question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: exhaust question [Re: cktoy] #837072 09/20/07 04:59 PM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

mine is stepped from 2" DP to 2.5" cat and muffler... and it works great, mine is a v6 though.

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Entire Thread
Subject	Posted By	Posted
exhaust question	cktoy	09/20/07 03:41 AM
Re: exhaust question	Gregg	09/20/07 06:13 AM
Re: exhaust question	kewlynx	09/20/07 08:10 AM
Re: exhaust question	cktoy	09/20/07 02:00 PM
Re: exhaust question	Greg_Canada	09/20/07 04:59 PM
Re: exhaust question	IceBlueT	09/20/07 08:23 PM
Re: exhaust question	Snowtoy	09/21/07 12:54 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.467s Queries: 16 (3.465s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-06-03 10:47:32 UTC
Valid HTML 5 and Valid CSS