I am starting the process of installing my crawler gears from Matt. The tranny is out, the t-case housing is off. I have removed the snap ring on the end of the input shaft to the t-case and removed the bearing. I have also straghtened out the staked portion of the staked nut in the center of the clutch assembly.

I am stumped as to how to get that humungeous nut off. First, it takes a huge wrench, which I have something that will work. Second, I can't figure a way to hold the shaft or some other part so that I can turn the nut.

Jim Paget
88 YJ with a few changes

www.rrr4x4.com