Hi all, new here. I have a 95 Trppoer 3.2l SOHC that has a bad oil leak that appears to be from the valve cover gaskets. It is running down onto the exhaust manifold. I would like to attempt a gasket replacement and would like to know just how much work I am getting into. It appears the intake chamber needs to come off to do it. I'm no great mechanic but I have tools and time. Does anyone know if all the necessary gaskets, etc would likely be available at a parts store like NAPA or such? Also is there anything else I should consider doing during this project? It has about 180K miles on it and the timing belt and water pump have been replaced in the last 30K or so.
Thanks in advance.