DIY clutch job, T100???

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

DIY clutch job, T100??? #838014 09/25/07 07:51 PM

Joined: Dec 2005

Posts: 18

houston, tx

tim_s

Need a Spot

I'm needing a clutch and was wondering how much of a pain it is to do it yourself. I've replaced the clutch on my '95 civic which was not bad. Basically, I need to know if any of the components are too difficult to get to without dropping the engine, as I had to do with my '88 supra. I have the factory manual and tools are not a problem, generally speaking.

thanks

Entire Thread
Subject	Posted By	Posted
DIY clutch job, T100???	tim_s	09/25/07 07:51 PM
Re: DIY clutch job, T100???	tim_s	09/27/07 02:09 PM
Re: DIY clutch job, T100???	mmiller	09/27/07 09:00 PM
Re: DIY clutch job, T100???	ErikB	09/27/07 10:48 PM
Re: DIY clutch job, T100???	tim_s	10/01/07 09:39 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.407s Queries: 15 (4.405s) Memory: 0.6007 MB (Peak: 0.6337 MB) Data Comp: Off Server Time: 2026-10-27 23:18:02 UTC
Valid HTML 5 and Valid CSS