keyless entry won't function on driver's door

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: keyless entry won't function on driver's door [Re: JLEMOND] #838187 09/27/07 02:24 AM

Joined: Sep 2007

Posts: 18

rod99rodeo Offline

Need a Spot

Jerry -

You're dead on. I was just out looking at it again and was jiggling the harness at the hinge and the lock stopped working with the door open. So, now the question is which wire feeds the power door lock? Since it fails lock and unlock I suspect that it's a ground wire that is broken? Anybody out there with a wiring diagram for the driver's side door lock actuator harness?

Thanks again Jerry!

Rod

Entire Thread
Subject	Posted By	Posted
keyless entry won't function on driver's door	rod99rodeo	09/26/07 05:57 PM
Re: keyless entry won't function on driver's door	JLEMOND	09/27/07 02:20 AM
Re: keyless entry won't function on driver's door	rod99rodeo	09/27/07 02:24 AM
Re: keyless entry won't function on driver's door	rod99rodeo	09/27/07 09:32 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.769s Queries: 16 (3.608s) Memory: 0.6002 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-22 18:41:26 UTC
Valid HTML 5 and Valid CSS