Tune-up parts

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Tune-up parts [Re: GOI87] #839354 10/02/07 06:25 PM

Joined: Aug 2003

Posts: 480

Lower Hudson Valley, New York

MAC

Mudrunner

Aluminum is better than the brasses, but copper is considerably better than either. Aluminum wiring was a cheap alternative at the time but someone didn't know their chem and physics...or whoever got it accepted by code had a brother-in-law in the aluminum wire business.

Entire Thread
Subject	Posted By	Posted
Tune-up parts	CROWBAR	10/02/07 11:25 AM
Re: Tune-up parts	cktoy	10/02/07 01:53 PM
Re: Tune-up parts	GOI87	10/02/07 05:51 PM
Re: Tune-up parts	MAC	10/02/07 06:25 PM
Re: Tune-up parts	dknight	10/05/07 12:24 AM
Re: Tune-up parts	tucker80	10/05/07 03:04 AM
Re: Tune-up parts	LaCalavera	10/05/07 03:51 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.913s Queries: 16 (3.486s) Memory: 0.6047 MB (Peak: 0.6377 MB) Data Comp: Off Server Time: 2026-06-17 00:50:31 UTC
Valid HTML 5 and Valid CSS