crank vs. cam direction (timing chain job)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: crank vs. cam direction (timing chain job) [Re: hunterp] #839791 10/04/07 08:36 PM

Joined: Oct 2005

Posts: 392

Old Town, Maine

1986xtracab Offline

Mudrunner

if i understand you correctly, spin your crank another 360, it should put your cam at 12 and your crank as well

1986 xtra-cab 22re
stock everything
1991 bed

Entire Thread
Subject	Posted By	Posted
crank vs. cam direction (timing chain job)	hunterp	10/04/07 06:32 PM
Re: crank vs. cam direction (timing chain job)	1986xtracab	10/04/07 08:36 PM
Re: crank vs. cam direction (timing chain job)	Whizkidder	10/04/07 08:37 PM
Re: crank vs. cam direction (timing chain job)	mosk	10/04/07 09:24 PM
Re: crank vs. cam direction (timing chain job)	hunterp	10/05/07 09:04 PM
Re: crank vs. cam direction (timing chain job)	cktoy	10/06/07 03:14 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.444s Queries: 16 (3.442s) Memory: 0.6026 MB (Peak: 0.6356 MB) Data Comp: Off Server Time: 2026-06-02 03:42:04 UTC
Valid HTML 5 and Valid CSS