crank vs. cam direction (timing chain job)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: crank vs. cam direction (timing chain job) [Re: hunterp] #839792 10/04/07 08:37 PM

Joined: Dec 2004

Posts: 159

Georgia

Whizkidder Offline

Wheeler

Bring the crank around one turn -- your cam will end up correct.

Entire Thread
Subject	Posted By	Posted
crank vs. cam direction (timing chain job)	hunterp	10/04/07 06:32 PM
Re: crank vs. cam direction (timing chain job)	1986xtracab	10/04/07 08:36 PM
Re: crank vs. cam direction (timing chain job)	Whizkidder	10/04/07 08:37 PM
Re: crank vs. cam direction (timing chain job)	mosk	10/04/07 09:24 PM
Re: crank vs. cam direction (timing chain job)	hunterp	10/05/07 09:04 PM
Re: crank vs. cam direction (timing chain job)	cktoy	10/06/07 03:14 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.437s Queries: 16 (3.435s) Memory: 0.6023 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-06-02 13:36:49 UTC
Valid HTML 5 and Valid CSS