AlrightI know I'm a noob and whatnot but I did my search and didn't really find what I was looking for. I'm getting a ported head with oversized valves, mid-range cam, and dual sidedraft 36mm mikunis off of a buddy for pretty cheap. I plan on rebuilding the motor,and sending that head out to be freshened up.and carbs to be rebuilt. What I want to know, is what would you guys do for the bottom end to match the top end? I'm looking to get the most hp,out of mid-high range rpm, without stroking or turboing. This truck is used strictly in the mud, it is driven onto the trailer, off the trailer, wheeled and loaded back up, so i'm not concerned about trail capibility or crawling. I got about $1500-$1700 to work with on the motor. The motor is the first thing I'm building and the rest of the truck I'll finish as I go. So let me know what you would do motorwise.