Plugging brake lines

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Plugging brake lines #841512 10/15/07 12:29 AM

Joined: May 2006

Posts: 32

Utah

trickster

Getting the Wheeling Fever

I am going to be doing some work on my rigs brakes soon (adding stainless lines). What do you guys use to plug the hard lines so I dont completely drain the master cylinder while I switch flexible lines? I am sure I could come up with something, but maybe someone has a quick simple solution. Thanks.

Entire Thread
Subject	Posted By	Posted
Plugging brake lines	trickster	10/15/07 12:29 AM
Wood golf pegs.	Bogo	10/15/07 01:31 AM
Re: Wood golf pegs.	4Crawler	10/15/07 01:47 AM
Re: Plugging brake lines	OOP'S	10/15/07 01:47 AM
Re: Plugging brake lines	trickster	10/15/07 04:06 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.497s Queries: 15 (3.494s) Memory: 0.6002 MB (Peak: 0.6332 MB) Data Comp: Off Server Time: 2026-06-09 16:02:59 UTC
Valid HTML 5 and Valid CSS