pulling engine

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: pulling engine [Re: Dieselshop] #841738 10/16/07 01:27 AM

Joined: Dec 2000

Posts: 882

Black Hills of South Dakota

missouriman Offline

Rock Warrior

there is one bolt that is a pain.
it is behind the pully, but you can get at it with an open end wrench. take all the other bolts out then work on it.. same putting it back on, you have to thread that bolt in a little at a time, but don't tighten it untill you get the others in..
I am assuming 22re...

Entire Thread
Subject	Posted By	Posted
pulling engine	MAC	10/15/07 11:32 PM
Re: pulling engine	Dieselshop	10/15/07 11:43 PM
Re: pulling engine	missouriman	10/16/07 01:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.515s Queries: 16 (3.513s) Memory: 0.5949 MB (Peak: 0.6279 MB) Data Comp: Off Server Time: 2026-05-28 18:32:31 UTC
Valid HTML 5 and Valid CSS