first gen rodeo body, same on manual and auto?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: first gen rodeo body, same on manual and auto? [Re: 94rodeo] #841885 10/18/07 01:32 AM

Joined: Aug 2007

Posts: 32

Austin, Tx

Jaybird323 Offline

Getting the Wheeling Fever

yeah. I figure it would be a waste of time and money to produce the same truck with different body because of the transmission when the shifter is in the same place.

1994 Isuzu Rodeo 4x4. Indy4x lift shackles in rear, cranked bars in front. 1 1/2" lift on 31" Pathfinder a/t

Entire Thread
Subject	Posted By	Posted
first gen rodeo body, same on manual and auto?	94rodeo	10/16/07 10:09 PM
Re: first gen rodeo body, same on manual and auto?	Jaybird323	10/17/07 03:51 PM
Re: first gen rodeo body, same on manual and auto?	94rodeo	10/18/07 12:14 AM
Re: first gen rodeo body, same on manual and auto?	Jaybird323	10/18/07 01:32 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.555s Queries: 16 (3.553s) Memory: 0.5990 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-04 21:46:52 UTC
Valid HTML 5 and Valid CSS